Coupling the H295R with ERα and AR U2OS CALUX assays enables simultaneous testing for estrogenic, anti-androgenic and steroidogenic modalities.

Endocrine active substances, including steroidogenesis modulators, have received increased attention. The in vitro H295R steroidogenesis assay (OECD TG 456) is commonly used to test for this modality. However, current detection methods often fail to capture alterations to estrogen biosynthesis. The present study explored the potential of ERα and AR CALUX bioassays to serve as a detection system for the original H295R assay, as they can quantify lower hormone concentrations and can simultaneously provide information about estrogen- and androgen-receptor activities. Using substances from the original OECD validation study, we obtained lowest observed effect concentrations for steroidogenesis mostly equivalent to those previously reported and sometimes lower for estrogen biosynthesis. However, categorization of many of these substances as receptor (ant)agonists or disruptors of steroidogenesis was difficult because often substances had both modalities, including some where the receptor-mediated activities were identified at concentrations below those triggering steroidogenic effects. When the leading activity was not accounted for, H295R-CALUX assay sensitivity in comparison to the OECD validation study was 0.50 for androgen and 0.78 for estrogen biosynthesis. However, upon reinterpretation of the combined assay results to identify endocrine activities without regard to the modality or direction of effects, assay sensitivity was equal to 1.00. These proof-of-concept study findings indicate the high relevance of this assay for the identification of endocrine active substances with additional valuable mode-of-action information and the capacity to detect smaller changes in estrogen biosynthesis, suggesting that the coupled H295R-CALUX assay has promise for the analysis of samples in a decision-making context.

Deciphering the origin of total estrogenic activity of complex mixtures.

Introduction: Identifying compounds with endocrine properties in food is getting increasingly important. Current chemical analysis methodology is mainly focused on the identification of known substances without bringing insight for biological activity. Recently, the application of bioassays has been promoted for their potential to detect unknown bioactive substances and to provide information on possible interactions between molecules. From the toxicological perspective, measuring endocrine activity cannot inform on endocrine disruption and/or health risks without sufficient knowledge on the nature of the responsible factors. Methods: The present study addresses a promising approach using High Performance Thin-Layer Chromatography (HPTLC) coupled to bioassays were analyzed using the Liquid Chromatography Mass-Spectrometry (LC-MS). The estrogen receptor activation was assessed using the transcription activation Estrogen Receptor Alpha Chemical Activated LUciferase gene eXpression assay (ERα- CALUX) and the HPTLC coupled to the Estrogen Screen Yeast assay (p-YES). Results: Seven isoflavones were identified in the soy isolates. Estrogen receptor activation was assessed for both, the identified isoflavones and the soy isolates with ERα-CALUX test. Correlation between the soy isolates extracts and the identified isoflavones was shown. Moreover, p-YES revealed the presence of an estrogenic bioactive zone. Analysis of the bioactive zone through LCHRMS highlighted signals corresponding to several isoflavones already detected in the isolates as well as two additional ones. For all detected isoflavones, an estrogenic activity dose-response was established in both bioassays. Conclusion: Finally, genistein, daidzein, and naringenin were found as the most active substances. A concordance analysis integrating the analytical and bioassay data indicated that genistein and daidzein were the drivers of the estrogenic activity of these soy protein isolates. Altogether, these data suggest that the integration of HPTLC-bioassay together with chemical analysis is a powerful approach to characterize the endocrine activity of complex mixtures.

Interlaboratory Study to Evaluate a Testing Protocol for the Safety of Food Packaging Coatings.

According to European regulations, migration from food packaging must be safe. However, currently, there is no consensus on how to evaluate its safety, especially for non-intentionally added substances (NIAS). The intensive and laborious approach, involving identification and then quantification of all migrating substances followed by a toxicological evaluation, is not practical or feasible. In alignment with the International Life Sciences Institute (ILSI) and the European Union (EU) guidelines on packaging materials, efforts are focused on combining data from analytics, bioassays and in silico toxicology approaches for the risk assessment of packaging materials. Advancement of non-targeted screening approaches using both analytical methods and in vitro bioassays is key. A protocol was developed for the chemical and biological screening of migrants from coated metal packaging materials. This protocol includes guidance on sample preparation, migrant simulation, chemical analysis using liquid chromatography (LC-MS) and validated bioassays covering endocrine activity, genotoxicity and metabolism-related targets. An inter-laboratory study was set-up to evaluate the consistency in biological activity and analytical results generated between three independent laboratories applying the developed protocol and guidance. Coated packaging metal panels were used in this case study. In general, the inter-laboratory chemical analysis and bioassay results displayed acceptable consistency between laboratories, but technical differences led to different data interpretations (e.g., cytotoxicity, cell passages, chemical analysis). The study observations with the greatest impact on the quality of the data and ultimately resulting in discrepancies in the results are given and suggestions for improvement of the protocol are made (e.g., sample preparation, chemical analysis approaches). Finally, there was agreement on the need for an aligned protocol to be utilized by qualified laboratories for chemical and biological analyses, following best practices and guidance for packaging safety assessment of intentionally added substances (IAS) and NIAS to avoid inconsistency in data and the final interpretation.

Incorporation of Metabolic Activation in the HPTLC-SOS-Umu-C Bioassay to Detect Low Levels of Genotoxic Chemicals in Food Contact Materials.

The safety evaluation of food contact materials requires excluding mutagenicity and genotoxicity in migrates. Testing the migrates using in vitro bioassays has been proposed to address this challenge. To be fit for that purpose, bioassays must be capable of detecting very low, safety relevant concentrations of DNA-damaging substances. There is currently no bioassay compatible with such qualifications. High-performance thin-layer chromatography (HPTLC), coupled with the planar SOS Umu-C (p-Umu-C) bioassay, was suggested as a promising rapid test (~6 h) to detect the presence of low levels of mutagens/genotoxins in complex mixtures. The current study aimed at incorporating metabolic activation in this assay and testing it with a set of standard mutagens (4-nitroquinoline-N-oxide, aflatoxin B1, mitomycin C, benzo(a)pyrene, N-ethyl nitrourea, 2-nitrofluorene, 7,12-dimethylbenzanthracene, 2-aminoanthracene and methyl methanesulfonate). An effective bioactivation protocol was developed. All tested mutagens could be detected at low concentrations (0.016 to 230 ng/band, according to substances). The calculated limits of biological detection were found to be up to 1400-fold lower than those obtained with the Ames assay. These limits are lower than the values calculated to ensure a negligeable carcinogenic risk of 10-5. They are all compatible with the threshold of toxicological concern for chemicals with alerts for mutagenicity (150 ng/person). They cannot be achieved by any other currently available test procedures. The p-Umu-C bioassay may become instrumental in the genotoxicity testing of complex mixtures such as food packaging, foods, and environmental samples.

Direct Comparison of the Lowest Effect Concentrations of Mutagenic Reference Substances in Two Ames Test Formats.

The Ames assay is the standard assay for identifying DNA-reactive genotoxic substances. Multiple formats are available and the correct choice of an assay protocol is essential for achieving optimal performance, including fit for purpose detection limits and required screening capacity. In the present study, a comparison of those parameters between two commonly used formats, the standard pre-incubation Ames test and the liquid-based Ames MPF™, was performed. For that purpose, twenty-one substances with various modes of action were chosen and tested for their lowest effect concentrations (LEC) with both tests. In addition, two sources of rat liver homogenate S9 fraction, Aroclor 1254-induced and phenobarbital/ß-naphthoflavone induced, were compared in the Ames MPF™. Overall, the standard pre-incubation Ames and the Ames MPF™ assay showed high concordance (>90%) for mutagenic vs. non-mutagenic compound classification. The LEC values of the Ames MPF™ format were lower for 17 of the 21 of the selected test substances. The S9 source had no impact on the test results. This leads to the conclusion that the liquid-based Ames MPF™ assay format provides screening advantages when low concentrations are relevant, such as in the testing of complex mixtures.

Limitations of currently available in vitro oestrogenicity bioassays for effect-based testing of whole foods as the basis for decision making.

The idea that previously unknown hazards can be readily revealed in complex mixtures such as foods is a seductive one, giving rise to the hope that data from effect-based assays of food products collected in market surveys is of suitable quality to be the basis for data-driven decision-making. To study this, we undertook a comparative study of the oestrogenicity of blinded cereal samples, both in a number of external testing laboratories and in our own facility. The results clearly showed little variance in the activities of 9 samples when using a single method, but great differences between the activities from each method. Further exploration of these findings suggest that the oestrogenic activity is likely an inherent part of the natural food matrix which the varying sample preparation methods are able to release and extract to differing degrees. These issues indicate the current poor suitability of these types of datasets to be used as the basis for consumer advice or food decision-making. Data quality must be improved before such testing is used in practice.

Detection of low levels of genotoxic compounds in food contact materials using an alternative HPTLC-SOS-Umu-C assay

Food contact materials (FCMs) are perceived as major sources of chemical food contamination, bringing signif­icant safety uncertainties into the food chain. Consequently, there has been an increasing demand to improve hazard and risk assessment of FCMs. High-performance thin-layer chromatography (HPTLC) coupled to a genotoxicity bio­assay has been promoted as an alternative approach to assess food packaging migrates. To investigate the value of such a testing approach, a sensitive planar SOS-Umu-C assay has been developed using the Salmonella strain. The new conditions established based on HPTLC were verified by comparison with microtiter plate assays, the Ames and Salmonella-SOS-Umu-C assays. The lowest effective concentration of the genotoxin 4-nitroquinoline-1-oxide (0.53 nM; 20 pg/band) in the SOS-Umu-C assay was 176 times lower than in the microtiter plate counterpart. This was achieved by the developed chromatographic setup, including a fluorogenic instead of chromogenic substrate. As proof-of-principle, FCM extracts and migrates from differently coated tin cans were analyzed. The performance data highlighted reliable dose-response curves, good mean reproducibility, no quenching or other matrix effects, no solvent exposure limitations, and no need for a solid phase extraction or concentration step due to high sensitivity in the picomolar range. Although further performance developments of the assay are still needed, the developed planar assay was successfully proven to work quantitatively in the food packaging field.

Evaluation of the Suitability of Mammalian In Vitro Assays to Assess the Genotoxic Potential of Food Contact Materials.

BACKGROUND: Non-targeted screening of food contact materials (FCM) for non-intentionally added substances (NIAS) reveals a great number of unknown and unidentified substances present at low concentrations. In the absence of toxicological data, the application of the threshold of toxicological concern (TTC) or of EU Regulation 10/2011 requires methods able to fulfill safety threshold criteria. In this review, mammalian in vitro genotoxicity assays are analyzed for their ability to detect DNA-damaging substances at limits of biological detection (LOBD) corresponding to the appropriate safety thresholds. RESULTS: The ability of the assays to detect genotoxic effects varies greatly between substance classes. Especially for direct-acting mutagens, the assays lacked the ability to detect most DNA reactive substances below the threshold of 10 ppb, making them unsuitable to pick up potential genotoxicants present in FCM migrates. However, suitability for the detection of chromosomal damage or investigation of other modes of action makes them a complementary tool as part of a standard test battery aimed at giving additional information to ensure safety. CONCLUSION: improvements are necessary to comply with regulatory thresholds to consider mammalian genotoxicity in vitro assays to assess FCM safety.

Mutagenicity assessment of food contact material migrates with the Ames MPF assay.

A major challenge in the safety assessment of food contact materials (FCM) is the evaluation of unknown non-intentionally added substances (NIAS). Even though consumer exposure levels may be quantitatively low, these substances are considered to be of high toxicological concern if they act as DNA reactive mutagens. From a safety assessment perspective, it is therefore important to detect their presence in FCM migrates. The present study applied the Ames MPF assay to assess the mutagenicity of migrates obtained from 30 food contact material samples out of 3 categories: plastics, composite materials and coatings. As a food simulant, 95% ethanol (EtOH) had a superior performance to less volatile simulants when evaluating recovery rates of representative model substances in different volatility categories. To monitor possible interference of the FCM matrix with Ames MPF results, migrates were spiked with reference substances and recovery rates were established. Out of 30 samples tested, two caused significant inhibition of revertant formation in the presence of the spiking control. Overall detection limits of the applied test method were estimated by determination of the lowest effective concentrations (LEC) for 10 Ames-positive substances. Even though the current limits of detection are not sufficient to entirely fulfil regulatory and safety requirements, three out of 30 FCMs showed evidence of dose-dependent effects in the Ames MPF assay. Overall, the data obtained supported the relevance of testing FCM migrates for DNA reactive contaminants and showed the value of the Ames MPF assay for the safety assessment of FCMs.

Use of in vitro bioassays to facilitate read-across assessment of nitrogen substituted heterocycle analogues of polycyclic aromatic hydrocarbons.

Nitrogen-containing polycyclic aromatic hydrocarbons (PANHs or azaarenes) are compounds structurally similar to PAHs (carbon substituted by a nitrogen) reported to occur at low levels in food. Although limited, literature may suggest possible higher toxicity than for PAHs. Using a battery of in vitro assays, the toxicological properties of uncharacterized PANHs of increasing ring number were compared to those of characterized structural PAH analogues. The parameters measured covered key events relevant to the AOP developed for Benzo(a)pyrene: AhR activation, mutagenicity and DNA-damage with and without metabolic activation and endocrine receptors activation/inhibition. There was a strong correlation between the chemical structure and the biological activities of the compounds. AhR activation was the most sensitive parameter with a direct correlation between potency and ring number. The most potent genotoxic chemicals were found amongst the ones with the highest number of ring, and under metabolic activation. Such an approach allowed designing sub-groups based on biological properties in addition to structural similarities. Within a sub-group, toxicological data of tested chemicals may be used to characterize hazard of biologically similar but toxicologically uncharacterized substances. This indicates that in addition to structural properties, in vitro biological data may be useful to conduct read-across.

Synthesis, identification and quantification of oligomers from polyester coatings for metal packaging.

Polyester can coatings protect both food and packaging from mutual contamination. Even though, can coatings may release Non-Intentionally Added Substances (NIAS) in addition to Intentionally Added Substances (IAS). As NIAS are mainly constituted by cyclic or linear side products that are formed during the polymerization process, we focused our attention on these oligomeric species of molecular weight <1000 Da. These oligomers were obtained from two different polyester resins, each synthesized from four monomers (two phthalic acids and two diols), and from the corresponding final enamel can coatings using ethanol at 95% and 50% at 60 °C for 4 h and 10 days, respectively, as food simulants. HPLC-ESI-MS analysis on the extracts allowed identifying various cyclic and linear oligomers. For the conclusive identification of the different oligomers and their isomeric structures, ad hoc standards were synthesized by acylation reaction between alkyl diols and phthaloyl chlorides. By comparison of 1H NMR spectra, linear and cyclic oligomers were characterized by finding the major presence of 2 + 2 cyclic compounds. The 16 synthesized standards, 4 linear and 12 cyclic compounds were used to establish a method for quantification of linear and cyclic oligomers in enamel migration samples by micro HPLC-high-resolution MS (HRMS). The results showed no significant differences between the amounts of cyclic oligomers extracted with both ethanol concentrations (50 and 95%) and time contact. The extracts showed only a small amount of linear compounds and a prevalence of 2 + 2 cyclic oligomers. The work shows the great importance of the synthesis of specific standards to allow exact quantification in food contact material migrates.

Suitability of the Ames test to characterise genotoxicity of food contact material migrates.

Non-intentionally added substances (NIAS) are chemical impurities which can migrate from packaging materials (FCM) into food. Safety assessment of NIAS is required by European law, but currently there is no comprehensive testing strategy available. In this context, one key element is to get insight on the potential presence of genotoxic NIAS in FCM migrates. This raises questions about the limit at which genotoxins can be detected in complex mixtures such as FCM migrates, and if such limits of detection (LOD) would be compatible with safety. In this context, the present review assesses the suitability of the Ames assay to address genotoxicity of FCM migrates. Lowest effective concentrations of packaging-related and other chemicals in test media were retrieved from scientific literature and used as surrogates of LODs to be benchmarked against a value of 0.01 mg kg-1 (10 ppb) in migrates. This is a pragmatic threshold used in FCM safety evaluation to prioritise substances requiring proper identification and risk assessment. The analysis of the data shows that only potent genotoxins can theoretically be detectable at a level of 0.01 mg kg-1 in migrates or food. Only a minority (10%) of genotoxic chemicals reported to be associated with FCMs could be picked up at a level of 0.01 mg kg-1 or lower. Overall, this review shows that the Ames test in its present form cannot be used as standalone method for evaluating the genotoxic potential of FCM migrates, but must be used together with other information from analytical chemistry and FCM manufacturing.

Using bisphenol A and its analogs to address the feasibility and usefulness of the CALUX-PPARγ assay to identify chemicals with obesogenic potential.

Environmental chemical exposures have been implicated in the obesity epidemic as potential mis-regulators of a variety of metabolic pathways. As agonism of the peroxisome proliferator-activated nuclear hormone receptor γ (PPARγ) is one of the suspected mechanisms involved, a PPARγ screening assay may have relevance for the biodetection of such effects of environmental chemicals. To test this hypothesis, we established the PPARγ2-CALUX® assay in-house and tested it against a number of known and suspected PPARγ modulators. Furthermore, we added a rat liver S9 metabolizing system to the protocol to introduce metabolic competence to the assay. Our results confirmed the responsiveness of the cell line to the known PPARγ agonists and antagonists: rosiglitazone, tributyltin, 15-deoxy-Δ12,14-prostaglandin J2, GW9662 and diclofenac. These data are in agreement with previous studies in various models. Seven bisphenol analogs tested induced little to no agonist activity, but all demonstrated antagonistic properties. These findings were contrary to both our assumptions and literature reports. Addition of the S9-metabolizing system to each of these tests did not alter any of the measured activities. Taken together, it seems probable that there are additional obesogenic effects of these chemicals which would not be detected by this assay.

Integrating bioassays and analytical chemistry as an improved approach to support safety assessment of food contact materials.

Food contact materials (FCM) contain chemicals which can migrate into food and result in human exposure. Although it is mandatory to ensure that migration does not endanger human health, there is still no consensus on how to pragmatically assess the safety of FCM since traditional approaches would require extensive toxicological and analytical testing which are expensive and time consuming. Recently, the combination of bioassays, analytical chemistry and risk assessment has been promoted as a new paradigm to identify toxicologically relevant molecules and address safety issues. However, there has been debate on the actual value of bioassays in that framework. In the present work, a FCM anticipated to release the endocrine active chemical 4-nonyphenol (4NP) was used as a model. In a migration study, the leaching of 4NP was confirmed by LC-MS/MS and GC-MS. This was correlated with an increase in both estrogenic and anti-androgenic activities as measured with bioassays. A standard risk assessment indicated that according to the food intake scenario applied, the level of 4NP measured was lower, close or slightly above the acceptable daily intake. Altogether these results show that bioassays could reveal the presence of an endocrine active chemical in a real-case FCM migration study. The levels reported were relevant for safety assessment. In addition, this work also highlighted that bioactivity measured in migrate does not necessarily represent a safety issue. In conclusion, together with analytics, bioassays contribute to identify toxicologically relevant molecules leaching from FCM and enable improved safety assessment.

Differentiating true androgen receptor inhibition from cytotoxicity-mediated reduction of reporter-gene transactivation in-vitro.

In vitro effect-based reporter assays are applied as biodetection tools designed to address nuclear receptor mediated-modulation. While such assays detect receptor modulating potential, cell viability needs to be addressed, preferably in the same well. Some assays circumvent this by co-transfecting a second constitutively-expressed marker gene or by multiplexing a cytotoxicity assay. Some assays, such as the CALUX®, lack this feature. The cytotoxic effects of unknown substances can confound in vitro assays, making the interpretation of results difficult and uncertain, particularly when assessing antagonistic activity. It's necessary to determine whether the cause of the reporter signal decrease is an antagonistic effect or a non-specific cytotoxic effect. To remedy this, we assessed the suitability of multiplexing a cell viability assay within the CALUX® transcriptional activation test for anti-androgenicity. Tests of both well-characterized anti-androgens and cytotoxic compounds demonstrated the suitability of this approach for discerning between the molecular mechanisms of action without altering the nuclear receptor assay; though some compounds were both cytotoxic and anti-androgenic. The optimized multiplexed assay was then applied to an uncharacterized set of polycyclic aromatic compounds. These results better characterized the mode of action and the classification of effects. Overall, the multiplexed protocol added value to CALUX test performance.

Incorporation of a metabolizing system in biodetection assays for endocrine active substances.

The use of in vitro assays is important for the biodetection of endocrine active substances (EAS), reducing and replacing the in vivo studies required for regulatory assessment. However, this approach often fails to take into account the role of biotransformation on the activity of the test substances. A method incorporating an S9 metabolic system into the CALUX-reporter gene assays for estrogen receptor α- and anti-androgen receptor -mediated activities has been developed. Methoxychlor, which is known to exhibit increased estrogenic and anti-androgenic activities after biotransformation, was used to set up the method in ERa and anti-AR CALUX. For the anti-androgenic assay, stanozolol was used as a competing agonist not metabolized by S9. The method was first applied in both agonist and antagonist modes to methoxychlor and bisphenol A, as positive and negative controls, respectively. Then, benzo(a)pyrene and flutamide were also tested for their potential of bioactivation. Co-treatment with S9 successfully increased the ERα agonist and AR antagonist potency of methoxychlor; no change was observed for bisphenol A. Incubation with S9 also enhanced the anti-androgenic activity of flutamide. Interestingly, the metabolism of benzo(a)pyrene by the S9 resulted in an increased estrogen receptor-mediated transcriptional activation; any increase in the potency was only minor. It is likely that both enzyme kinetics and metabolite stability have influenced these effects, which would affect the composition of the final metabolite mixture. Together these results demonstrate the relevance of including biotransformation in in vitro bioassays for the detection of EAS.

Hazard assessment through hybrid in vitro / in silico approach: The case of zearalenone.

Within the framework of reduction, refinement and replacement of animal experiments, new approaches for identification and characterization of chemical hazards have been developed. Grouping and read across has been promoted as a most promising alternative approach. It uses existing toxicological information on a group of chemicals to make predictions on the toxicity of uncharacterized ones. In the present work, the feasibility of applying in vitro and in silico techniques to group chemicals for read across was studied using the food mycotoxin zearalenone (ZEN) and metabolites as a case study. ZEN and its reduced metabolites are known to act through activation of the estrogen receptor α (ERα). The ranking of their estrogenic potencies appeared highly conserved across test systems including binding, in vitro and in vivo assays. This data suggests that activation of ERα may play a role in the molecular initiating event (MIE) and be predictive of adverse effects and provides the rationale to model receptor-binding for hazard identification. The investigation of receptor-ligand interactions through docking simulation proved to accurately rank estrogenic potencies of ZEN and reduced metabolites, showing the suitability of the model to address estrogenic potency for this group of compounds. Therefore, the model was further applied to biologically uncharacterized, commercially unavailable, oxidized ZEN metabolites (6α-, 6ß-, 8α-, 8ß-, 13- and 15-OH-ZEN). Except for 15-OH-ZEN, the data indicate that in general, the oxidized metabolites would be considered a lower estrogenic concern than ZEN and reduced metabolites.

Quantitative comparison between in vivo DNA adduct formation from exposure to selected DNA-reactive carcinogens, natural background levels of DNA adduct formation and tumour incidence in rodent bioassays.

This study aimed at quantitatively comparing the occurrence/formation of DNA adducts with the carcinogenicity induced by a selection of DNA-reactive genotoxic carcinogens. Contrary to previous efforts, we used a very uniform set of data, limited to in vivo rat liver studies in order to investigate whether a correlation can be obtained, using a benchmark dose (BMD) approach. Dose-response data on both carcinogenicity and in vivo DNA adduct formation were available for six compounds, i.e. 2-acetylaminofluorene, aflatoxin B1, methyleugenol, safrole, 2-amino-3,8-dimethylimidazo[4,5-f]quinoxaline and tamoxifen. BMD(10) values for liver carcinogenicity were calculated using the US Environmental Protection Agency BMD software. DNA adduct levels at this dose were extrapolated assuming linearity of the DNA adduct dose response. In addition, the levels of DNA adducts at the BMD(10) were compared to available data on endogenous background DNA damage in the target organ. Although for an individual carcinogen the tumour response increases when adduct levels increase, our results demonstrate that when comparing different carcinogens, no quantitative correlation exists between the level of DNA adduct formation and carcinogenicity. These data confirm that the quantity of DNA adducts formed by a DNA-reactive compound is not a carcinogenicity predictor but that other factors such as type of adduct and mutagenic potential may be equally relevant. Moreover, comparison to background DNA damage supports the notion that the mere occurrence of DNA adducts above or below the level of endogenous DNA damage is neither correlated to development of cancer. These data strongly emphasise the need to apply the mode of action framework to understand the contribution of other biological effect markers playing a role in carcinogenicity.

Instant coffee with high chlorogenic acid levels protects humans against oxidative damage of macromolecules.

SCOPE: Coffee is among the most frequently consumed beverages. Its consumption is inversely associated to the incidence of diseases related to reactive oxygen species; the phenomenon may be due to its antioxidant properties. Our primary objective was to investigate the impact of consumption of a coffee containing high levels of chlorogenic acids on the oxidation of proteins, DNA and membrane lipids; additionally, other redox biomarkers were monitored in an intervention trial. METHODS AND RESULTS: The treatment group (n=36) consumed instant coffee co-extracted from green and roasted beans, whereas the control consumed water (800 mL/P/day, 5 days). A global statistical analysis of four main biomarkers selected as primary outcomes showed that the overall changes are significant. 8-Isoprostaglandin F2α in urine declined by 15.3%, 3-nitrotyrosine was decreased by 16.1%, DNA migration due to oxidized purines and pyrimidines was (not significantly) reduced in lymphocytes by 12.5 and 14.1%. Other markers such as the total antioxidant capacity were moderately increased; e.g. LDL and malondialdehyde were shifted towards a non-significant reduction. CONCLUSION: The oxidation of DNA, lipids and proteins associated with the incidence of various diseases and the protection against their oxidative damage may be indicative for beneficial health effects of coffee.

A physiologically based biodynamic (PBBD) model for estragole DNA binding in rat liver based on in vitro kinetic data and estragole DNA adduct formation in primary hepatocytes.

Estragole has been shown to be hepatocarcinogenic in rodent species at high-dose levels. Translation of these results into the likelihood of formation of DNA adducts, mutation, and ultimately cancer upon more realistic low-dose exposures remains a challenge. Recently we have developed physiologically based biokinetic (PBBK) models for rat and human predicting bioactivation of estragole. These PBBK models, however, predict only kinetic characteristics. The present study describes the extension of the PBBK model to a so-called physiologically based biodynamic (PBBD) model predicting in vivo DNA adduct formation of estragole in rat liver. This PBBD model was developed using in vitro data on DNA adduct formation in rat primary hepatocytes exposed to 1'-hydroxyestragole. The model was extended by linking the area under the curve for 1'-hydroxyestragole formation predicted by the PBBK model to the area under the curve for 1'-hydroxyestragole in the in vitro experiments. The outcome of the PBBD model revealed a linear increase in DNA adduct formation with increasing estragole doses up to 100 mg/kg bw. Although DNA adduct formation of genotoxic carcinogens is generally seen as a biomarker of exposure rather than a biomarker of response, the PBBD model now developed is one step closer to the ultimate toxic effect of estragole than the PBBK model described previously. Comparison of the PBBD model outcome to available data showed that the model adequately predicts the dose-dependent level of DNA adduct formation. The PBBD model predicts DNA adduct formation at low levels of exposure up to a dose level showing to cause cancer in rodent bioassays, providing a proof of principle for modeling a toxicodynamic in vivo endpoint on the basis of solely in vitro experimental data.